Bloominglabs Log
From Bloominglabs
Historical Document
This page is intended to document as much of our activities as possible so we can maintain a sense of history of what our group has done over time. It should be used for anything that happens outside of the Meeting_Minutes document.
July 2010
Bloominglabs is official!
Moved out of Jenett's basement and into our room at The Collaboration Room. Picked a name for our space. Formed Bloominglabs LLC and signed our lease for the room.
Held these workshops which where open to the public
- Soldering
- AVR programming I
- AVR programming II
- Arduino + RF/wireless
The Soldering workshop was our first and had 17 attendees (out of 6 RSVP's). The AVR workshops had 11 and 6 attendees respectively, and the Arduino RF workshop had 6 attendees. All went over extremely well and had very good feedback.
External Publicity
Local writer Kevin Makice wrote about The Collaboration Room and the Bloomington Hackerspace Initiative in his Wired blog Geek Dad. Member Joe Stone was at the Detroit Maker Faire the weekend of July 31st and sat on a panel about hackerspaces along with Mitch Altman.
August 2010
After the whirlwind that was July we relaxed and only held one workshop. Mitch Altman and Jimmy Rogers stopped by on August 19th to host a soldering workshop, it was another great success.
September 2010
- Obtained a drill press
- Got prototype of RFID door-access system working based on Open Access Control
- Installed shelves on main closet in space
- Cleaned up front porch power tool area
- Installed deadbolts on Matthew's and Arthur's doors
- Aluminum casting mini-workshop with coffee can forge
October 2010
- More work on RFID system
- Collaboween projects built with Matthew
- Arduino shield build parties
- Sumobot throwdown and halloween party at LVL1 in Louisville, KY
- Started accumulating hardware for plastic vacuum-forming table
November 2010
- More work on RFID system
- Prep for December soap-molding workshop
- Prep for January bugbots with Wonderlabs
- Built a plastic vacuum form machine for members to use
December 2010
- St. Nick's workshop (soap-molding/vacuum forming, hand-warmer sewing, hand-bag sewing, and card making)
- Reporter from Indiana Daily Student came and documented the workshop
January 2011
- BugBot workshop with Wonderlab
February 2011
- Contact Microphone Building Workshop hosted by CMKT4 (held at warehouse Behind Russian Recording Studios)
March 2011
- Preparations for July 4th Parade entry
- Electric wheel chair acquired for robotic platform hacking
April-June 2011
- Activity around TEDx Bloomington event - geocaching boxes started, but not enough time to finish these in time for TEDx
- Preparations for July 4th Parade entry
- smoke ring cannons
- twinki launchers
- IR LED message scroll-sign
- Strand Beast (walking machine) design well under way
- electric wheel chair platform hacking via CANUSB adapter
- Reporter from Bloom Magazine interviewed several members and observed a meeting in June
July 2011
- Parade float in Bloomington July 4th parade!
- Moved to our new space on Roll Avenue!!
- Follow-up from Bloom Magazine to get photos of our new space
- New RFID system acquired
- Table-top sander now in the space
- Dust collection system in the works
- Open-house July 23rd
- Lathe acquired
- Electrolysis rust removal system built for the lathe and general use
August 2011
- New RFID system built and tested
- Lathe cleanup on-going
- August 13th BugBots workshop at Wonderlab
- August 23rd Jay hosts an Arduino for Beginners workshop
September 2011
- Bloominglabs is featured is an article in Bloom magazine
- Rex, Jay, Jonathan, and others represent Bloominglabs at a booth at the Indy Mini-Maker Faire
October 2011
- That old standard, the AVR workshop
- dosman and FOOLS make hack-a-day for their lockpicking game (Steve did some programming for the scoreboard). The site buckles under the load.
November 2011
- Catarina Mota from NYC Resistor and Open Materials visits and tells us about interesting materials for projects. This workshop attracted some artists, and we hope to see more artists in the future.
December 2011
- Second Annual Holiday Mini-Workshops. Again the vacuum molder was very popular. Buddha and cellphone molds were made.
January 2012
- Jenett's C programming course starts
- Annual meeting. Members make big plans and then go eat some Bar-B-Q.
February 2012
- Soldering workshop. This one featured kits of dosman's 'Phasor', with nice etched boards
- Theremin building workshops with Harmony School begin. These continue through March.
March 2012
- Second soldering workshop. This one covered SMT techniques (Thanks Nick!)
- Bloominglabs holds its first Game Day
April 2012
- Bugbot workshop at Wonderlab
- Bloominglabs hosts a 'hardware hacking village' at Indy Linux Fest in conjunction with FOOLS featuring the Rumble Challenge, Typing of the Dead, the 'Shoot the Windows Logo and Win Candy' game, Snap Circuits, and more. People really dug it.
May 2012
- The team prepares for the hack-a-thon.
June 2012
- Bloominglabs team attended the 1st ever LVL1 Boneyard Hack-a-thon
- The lathe is fixed up to the point it is now operational
July 2012
- Lockers now available for rent
- Bugbot workshop at the Wonderlab Kids Camp - held at University Elementary School
August 2012
- Mid-sized mill acquired
- Monthly RasberryPi Meetups started on the first Tuesday each month
- Bloominglabs "Circle stickers" available to members
September 2012
- Our yearly open house was a smashing success, covered in the local Hearald Times paper the following day
- Circuit board etching workshop
- Rube Goldberg day at WonderLab - Jenett, Mitchell, Jonathan, and others participated
- Soldering workshop
October 2012
- Intro to Arduino workshop
- Participated in LVL1's "Make Food Not War" Hackathon
- Contacted by the Monroe County Library on having a makerspace within the Library, discussions ongoing
- Had meeting with city about the TechPark they have established
- Started Laser Etcher/cutter acquisition proposal for the space
- 10 week programming class led by Jenett
November 2012
- Helped Russ's friend rewire electric winch controls for a dumb-waiter system in his house
- Began discussions about holding a MakerFaire in Bloomington (to be named Makevention)
- City invited us to submit a response to their Firehouse RFI, began coordination with Nicole Jacquard with the IU FabLab on this front
- Contacted by Bray Entertainment Casting for a possibly spot in an upcoming reality TV show
December 2012
- St. Nicks workshop
- Closed Bloominglabs LLC, formed Bloominglabs Incorporated as a non-profit as a project of the School Factory
- Updated our install of MediaWiki for our front page, started work on a WordPress site as a formal front page
- Collaborated with IU/Kylie Peppler on Indiana 2013-2014 Innovation Fund Grant (did not get however)
January 2013
- Multi-room speaker system installed (Audio Network)
- Significant work put in on the Firehouse RFI submission, turned in on January 31st deadline
- Automatic web-based invoicing system setup for membership dues
- Asset tracking with asset tag printing capabilities for all objects in our physical space
- Setup a CRM system for grant and opportunity tracking and coordination
- Open Arena server setup inside the space
- Scrolling LED sign setup and accessible from IRC
- Auto-greeting system setup (festival text-to-speech greetings when badging in with RFID)
- Acquired a wood lathe and gouges for the space
February 2013
- Installed multi-room CCTV_Network with 8 channel computer controlled video switcher and frequency agile RF generator
- Facilitates presenters (and any other A/V media) which is present in the front room to be present in any other room in the space
- Competed in the international Open Arena hackerspace competition
- Received a MAME arcade cabinet into the space
March 2013
- Began fundraising for the laser cutter
- Following the March Geek Dinner we provided free ice cream for everyone who came over to Bloominglabs afterwords
- Corey setup the Bloominglabs Badge service https://badges.bloominglabs.org
- Jenett, Steve, and Nathan presented at the IU Makes lecture
- A journalism student posted her coverage of Bloominglabs.
- We did another Wonderlab bugbot workshop on March 30th
- At the end of the month we reached our pledge goal for funding the laser cutter
April 2013
- Participated in the Creativity Week event, work still ongoing into May with the 4th street bridge
- Placed the order for the laser cutter
May 2013
- Laser cutter arrived!!
- Saturday fleamarket event
- Setup video camera to watch the laser, connected to CCTV system
- A new member donated blood to have cash for his first months dues - way to set the bar high! (Will Robot)
June 2013
- Blue barrel bonanza workshops (rain and compost barrels)
- Machining workshops started
- Squishy circuit kids workshop with Wonderlab June 19th & 20th
- Geek camp with Kevin Makice June 26th (soldering, circuits, lock picking, etc.)
- Stop motion kids workshop at Elletsville Library June 24th, Monroe library on the 25th
- Space reallocation project in planning phases
- Many amazing laser projects created this month
July 2013
- July 3rd: accepted our 30th and 31st members!
- "Makey Makey" Wonderlab kids camp workshop - July 15th
- Drawdio Wonderlab kids camp workshop - July 16th
- Machining workshops for members
August 2013
- Makevention prep in full swing (held August 24th)
- Time lapse of bike dome being built: http://www.youtube.com/watch?v=UHxuAcvl6vc
- Laser cut wood and acrylic gear-wheel badges
- Laser cut paper trebuchet badges
- Continuation of machining workshops for members
September 2013
- Recovery from Makevention
- Laser tube replaced after an early death of our tube
- Continuation of machining workshops for members
- Started investigating larger locations for Bloominglabs
October 2013
- Arduino workshops
- Continuation of machining workshops for members
November 2013
- Started microcontroller nights every Thursday evening for members
- As part of microcontroller night, created Arduino controlled thermostat for space (w/Ethershield and web interface)
December 2013
- Craftmania at St. Nick's Workshop with Discardia at MCPL
- Continuation of machining workshops for members
- Nitocris from IU shoot a video for a series of UITS Tech Tips at Bloominglabs
