Exit Protocol
From Bloominglabs
If you are the last person to leave the space, please take a minute and check the following:
- That there are no fires. If there are, would you kindly put them out?
- That you have returned tools to their proper place and cleaned up your work area.
- That the door by the welding station, the garage door, and the front/main door are all locked.
- Winter:
- The door between the workshop and the meeting room is open.
- The thermostat is set to 60°f, if winter (thermostat is in the mud room in the workshop).
- Summer:
- The door between the workshop and the meeting room is closed.
- The AC is set to ~70°f and energy saver mode.
- That the laser/fan is powered off; and the vent is closed.
- And that you turn the lights off.
- And that whatever door you leave through locks behind you.
