Exit Protocol

If you are the last person to leave the space, please take a minute and check the following:

• That there are no fires. If there are, would you kindly put them out?
• That the door by the welding station, the garage door, and the door by the laser room are shut and locked.
• The AC is set to ~70°f and energy saver mode, if summer.
• The thermostat is set to 60°f, if winter.
• The door between the workshop and the meeting room is open.
• That the laser/fan is powered off; and the vent is closed.
• And that you turn the lights off.
• And that whatever door you leave through locks behind you.