Difference between revisions of "Exit Protocol"

From Bloominglabs
Jump to: navigation, search
(leave door between workshop and meeting room open)
Line 2: Line 2:
  
 
* That there are no fires. If there are, would you kindly put them out?
 
* That there are no fires. If there are, would you kindly put them out?
* That the door by the welding station, the garage door, and the door by the laser room are shut and locked.
+
* That the door by the welding station, the garage door, and the front/main door is locked.
* The AC is set to ~70°f and energy saver mode, if summer.
+
* Winter:
* The thermostat is set to 60°f, if winter.
+
** The door between the workshop and the meeting room is open.
* The door between the workshop and the meeting room is open.
+
** The thermostat is set to 60°f, if winter (thermostat is in the mud room in the workshop).
 +
* Summer:
 +
** The door between the workshop and the meeting room is closed.
 +
** The AC is set to ~70°f and energy saver mode.
 
* That the laser/fan is powered off; and the vent is closed.
 
* That the laser/fan is powered off; and the vent is closed.
 
* And that you turn the lights off.
 
* And that you turn the lights off.
 
* And that whatever door you leave through locks behind you.
 
* And that whatever door you leave through locks behind you.
  
 +
 +
[[Image:Qrcode_blabs_exit_protocol.jpg|none|thumb|100px|Link to latest version of this document]]
  
 
[[category:Operations]]
 
[[category:Operations]]
 
[[Category:The_Space]]
 
[[Category:The_Space]]

Revision as of 01:03, 24 January 2016

If you are the last person to leave the space, please take a minute and check the following:

  • That there are no fires. If there are, would you kindly put them out?
  • That the door by the welding station, the garage door, and the front/main door is locked.
  • Winter:
    • The door between the workshop and the meeting room is open.
    • The thermostat is set to 60°f, if winter (thermostat is in the mud room in the workshop).
  • Summer:
    • The door between the workshop and the meeting room is closed.
    • The AC is set to ~70°f and energy saver mode.
  • That the laser/fan is powered off; and the vent is closed.
  • And that you turn the lights off.
  • And that whatever door you leave through locks behind you.


Link to latest version of this document
Personal tools