Difference between revisions of "SatNOGS Ground Station v3"
(Created page with "<h2>Satellite Networked Open Ground Station</h2> I'm currently working on getting two types of ground stations working. The first will be a stationary/no-rotator station whic...") |
|||
| Line 6: | Line 6: | ||
== No-Rotator Station == | == No-Rotator Station == | ||
| − | I have a | + | I have a UHF "paralindy" antenna I've built with cshields, we did some preliminary testing and found they work well enough to continue testing. I've also mostly completed a 2m Lindenblad that the paralindy was loosely based on, that seems to work too. |
| + | == v3.1 Rotator Station == | ||
| + | Piecing together a complete build-of-materials for the latest version of the rotator is a little challenging. As of February 2019 a good summary can be found in this forum post: [https://community.libre.space/t/ground-station-hardaware-report/3235 https://community.libre.space/t/ground-station-hardaware-report/3235]. | ||
| + | When looking for documentation it's important to remember that information can live in 3 places: The wiki, the assembly guides, and in gitlab. | ||
| − | == | + | ====Build page for the hardware/mechanical parts==== |
| − | + | * | |
| + | * | ||
| + | |||
| + | ====Build page for the rotator controller (electronics)==== | ||
| + | * [https://wiki.satnogs.org/SatNOGS_Rotator_Controller https://wiki.satnogs.org/SatNOGS_Rotator_Controller] | ||
| + | * BOM for above board: [https://gitlab.com/librespacefoundation/satnogs/satnogs-rotator-controller/blob/v2.2/satnogs-rotator-controller-bom.ods https://gitlab.com/librespacefoundation/satnogs/satnogs-rotator-controller/blob/v2.2/satnogs-rotator-controller-bom.ods] | ||
| + | * The position encoder needed for DC motors is a separate project: [https://gitlab.com/librespacefoundation/satnogs/satnogs-rotator-controller-encoderhttps://gitlab.com/librespacefoundation/satnogs/satnogs-rotator-controller-encoder] | ||
| + | * | ||
| + | |||
| + | ==== ==== | ||
| + | * | ||
Revision as of 11:42, 1 February 2019
Contents |
Satellite Networked Open Ground Station
I'm currently working on getting two types of ground stations working. The first will be a stationary/no-rotator station which can pick up satellites as they pass overhead. The second station will be a rotator based station. This page will track my progress on both stations.
Info on the work I did on the v2 rotator ground station can be found here: SatNOGS_Ground_Station_v2
No-Rotator Station
I have a UHF "paralindy" antenna I've built with cshields, we did some preliminary testing and found they work well enough to continue testing. I've also mostly completed a 2m Lindenblad that the paralindy was loosely based on, that seems to work too.
v3.1 Rotator Station
Piecing together a complete build-of-materials for the latest version of the rotator is a little challenging. As of February 2019 a good summary can be found in this forum post: https://community.libre.space/t/ground-station-hardaware-report/3235.
When looking for documentation it's important to remember that information can live in 3 places: The wiki, the assembly guides, and in gitlab.
Build page for the hardware/mechanical parts
Build page for the rotator controller (electronics)
- https://wiki.satnogs.org/SatNOGS_Rotator_Controller
- BOM for above board: https://gitlab.com/librespacefoundation/satnogs/satnogs-rotator-controller/blob/v2.2/satnogs-rotator-controller-bom.ods
- The position encoder needed for DC motors is a separate project: [1]
