Difference between revisions of "PrintrBot Play"
From Bloominglabs
(Created page with "A preassembled [https://printrbot.com/shop/assembled-printrbot-play/ Printrbot Play (model 1505)] was donated arount 7 November 2016. Documentation can be found on [https://d...") |
(Firmware reloaded - progress but no cigar yet.) |
||
| Line 1: | Line 1: | ||
| − | A | + | A pre-assembled [https://printrbot.com/shop/assembled-printrbot-play/ Printrbot Play (model 1505)] was donated around 7 November 2016. |
Documentation can be found on [https://drive.google.com/drive/u/0/folders/0B9oj0J-4qhdjVldxdkt4TkdxbzQ?tid=0B9oj0J-4qhdjNU1VcmVhS3IwLXc this Google Drive folder]. | Documentation can be found on [https://drive.google.com/drive/u/0/folders/0B9oj0J-4qhdjVldxdkt4TkdxbzQ?tid=0B9oj0J-4qhdjNU1VcmVhS3IwLXc this Google Drive folder]. | ||
| + | |||
| + | |||
| + | ---- | ||
| + | Printer has been in a nonfunctional state. | ||
| + | |||
| + | February 23, 2017 reloaded bootloader and firmware with avrdude and a USBtinyISP programmer. | ||
| + | |||
| + | Reference [http://reprap.org/wiki/Printrboard reprap.org/wiki/printrboard] | ||
| + | |||
| + | [https://github.com/scwimbush/Printrboard-HID-Arduino-IDE-Support/tree/master/printrboard/avr/bootloaders BootloaderHID.hex ] | ||
| + | [https://github.com/Printrbot/firmware-updater/blob/gh-pages/binaries/ play-0.6.hex] | ||
| + | |||
| + | All seems to be working fine now except '''auto-leveling''' Z-axis which is a '''show stopper''' : ( | ||
Revision as of 12:14, 23 February 2017
A pre-assembled Printrbot Play (model 1505) was donated around 7 November 2016.
Documentation can be found on this Google Drive folder.
Printer has been in a nonfunctional state.
February 23, 2017 reloaded bootloader and firmware with avrdude and a USBtinyISP programmer.
Reference reprap.org/wiki/printrboard
BootloaderHID.hex play-0.6.hex
All seems to be working fine now except auto-leveling Z-axis which is a show stopper : (
