Difference between revisions of "PrintrBot Simple"
From Bloominglabs
m (Added Assembly Instruction link) |
(Restructured, reformatted, and fixed documentation links) |
||
| Line 1: | Line 1: | ||
| − | [http://help.printrbot.com/c/Old_Simple PrintrBot Simple v1 (1310)] | + | [[Image:PrintrBot.jpg|200px|thumb|PrintrBot its cabinet]] |
| − | + | Bloominglabs has a [http://help.printrbot.com/c/Old_Simple PrintrBot Simple v1 (1310)] 3D printer, controlled with a [[Sunverge | donated ag150]]. | |
| − | + | == Official Documentation == | |
| − | + | PrintrBot model 1310 is pretty old, and the information on it is not easily available on printrbot.com. All of the official documentation on the "legacy" printrbots can be found in [https://drive.google.com/open?id=0B9oj0J-4qhdjWThtZmY2YzJIRE0 this google drive folder]. The (copyrighted) assembly manual can be found [https://drive.google.com/open?id=0B9oj0J-4qhdjVXZhU3l6Um5LVTg here]. | |
| − | + | ||
| − | + | == Using Locally == | |
| − | + | Login to the ag150 with username "blabs". | |
| − | + | [https://ultimaker.com/en/products/cura-software Cura] software GPL AFFERO V1 | |
| − | + | ||
| + | == Using via Command Line == | ||
| + | Login remotely with secure shell: "ssh -XC blabs@192.168.1.137". | ||
| + | The Arduino terminal can be used to directly talk to the PrintrBot. | ||
Serial is set up to be 115200 baud. | Serial is set up to be 115200 baud. | ||
| − | + | === Useful [http://reprap.org/wiki/G-code g-codes] === | |
| − | Useful [http://reprap.org/wiki/G-code g-codes] | + | * <code>M115</code> reports Firmware installed. |
| − | + | ||
| − | + | ||
| − | M115 | + | |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | FIRMWARE_NAME: Marlin v1; Sprinter/grbl mashup for gen6 | |
| − | + | FIRMWARE_URL:http://www.mendel-parts.com | |
| + | PROTOCOL_VERSION:1.0 | ||
| + | MACHINE_TYPE Mendel | ||
| + | EXTRUDER_COUNT:3 | ||
| − | + | * <code>M114</code> reports position. | |
| − | + | * <code>M119</code> reports endpoint status. | |
Revision as of 00:05, 26 October 2016
Bloominglabs has a PrintrBot Simple v1 (1310) 3D printer, controlled with a donated ag150.
Contents |
Official Documentation
PrintrBot model 1310 is pretty old, and the information on it is not easily available on printrbot.com. All of the official documentation on the "legacy" printrbots can be found in this google drive folder. The (copyrighted) assembly manual can be found here.
Using Locally
Login to the ag150 with username "blabs". Cura software GPL AFFERO V1
Using via Command Line
Login remotely with secure shell: "ssh -XC blabs@192.168.1.137". The Arduino terminal can be used to directly talk to the PrintrBot. Serial is set up to be 115200 baud.
Useful g-codes
-
M115reports Firmware installed.
FIRMWARE_NAME: Marlin v1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:http://www.mendel-parts.com PROTOCOL_VERSION:1.0 MACHINE_TYPE Mendel EXTRUDER_COUNT:3
-
M114reports position.
-
M119reports endpoint status.
